Tips for Restaurant Refrigeration Repair in Toronto, ON

fridge repair toronto

Working in a restaurant, it's not uncommon to see a refrigeration system go out. If you're not able to fix the problem yourself (and most can't), you'll need to call in an expert for help. That expert is At Certified Mechanical, which has been providing refrigeration repair services for restaurants and other facilities in Toronto, ON, for many years We have extensive experience repairing ice machines and other equipment used in refrigeration systems, so when your unit needs attention fast you'll get the fastest service possible from us! Here are some tips on how we can help:

Replace The Defrost Timer

If you are experiencing any of the above issues, it is likely that your defrost timer needs to be replaced. If you want to fix this issue yourself, follow these steps:

  • Turn off power supply to refrigerator and disconnect from wall socket or circuit breaker.

  • Open up freezer door and remove ice maker assembly (it could be held by screws). This can vary depending on your model so consult with a professional if needed!

  • Remove old defrost timer by removing screws and pulling out of place. Install new one securely into place and reassemble everything back together again in reverse order (don't forget about putting batteries back into remote controls!)

Replace A Bad Compressor

If you are experiencing problems with your restaurant refrigeration system, there is a good chance that the compressor is to blame. A compressor is responsible for cooling down your refrigeration system and it does this by compressing gas into liquid form. The liquid then turns into a gas again as it passes through coils in your unit where it cools down before being compressed again by the motor.

This process happens over and over again until you have reached your desired temperature level or until something goes wrong with one of these components!

Replace A Bad Condenser Fan Motor

If you are experiencing problems with your condenser fan motor, it is likely that the unit needs to be replaced. The condenser fan motor is located in your condensing unit and is what cools down refrigerant. It is usually a 24V unit, with a squirrel cage type design.

Repairing refrigeration systems requires knowledge of the equipment, which is why we at Certified Mechanical. have it in spades.

With many years of experience in the field and a team of Toronto technicians who can help you with all your refrigeration repair needs, you can rest assured that your restaurant will be up and running again in no time!

We hope these tips help you with your restaurant refrigeration repair in Toronto, ON. If you have any questions or would like to schedule an appointment, please feel free to contact us today!